General settings

Date/Time

This menu describes date and clock settings.

1. Press [SETUP] > [General] > [Date/Time].
2. Press the Date/Time setting.

3. Press the desired items.

• [GPS time]: Displays time according to the received GNSS time.
• [24-hour format]: Switches to 12 hour or 24 hour format.

Language

This menu is used to set the language of the system.

1. Press [SETUP] > [General] > [Language].

2. Select the desired language.

Screensaver

This menu is used to select the screen displayed when the system power is turned off.

1. Press [SETUP] > [General] > [Screensaver].

2. Select the desired items.

• [Digital]: The digital clock and date are displayed.
• [Analogue]: The analogue clock and date are displayed.
• [None]: Nothing is displayed.

System info

Version info/Update

Version info

You can view software version, firmware version and Device ID.

Press [SETUP] > [General] > [System info] > [Version info/Update].

Update

For system’s software security, improved software or newly added function for system, you need an update.

1. Press [SETUP] > [General] > [System info] > [Version info/Update].

2. After inserting the USB with the update file, press [Update]. Once updating is complete, the system will automatically restart.

, Note

This product requires regular updates for software corrections and new functions. Updating may require up to 1 hour depending on the data size. Turning off the power or ejecting the USB during the update process may result in data loss. Make sure to keep the ignition on while update is in progress. The screens shown in this manual may differ with the actual screens of the product. The design and specification of this product may change without prior notification for product improvement.

Memory

You can check a memory space for voice memo.

(Total storage space, used memory space, remaining memory space).

Press [SETUP] > [General] > [System info] > [Memory].

, Note

When the storage is full, refer to “Deleting voice memo” part.

User Manual Web(QR code)

This menu is used to view the Web Manual.

1. Press [SETUP] > [General] > [System info] > [User Manual Web(QR code)].
2. Scan the QR code of your mobile device. Keep display bright and avoid glare to scan correctly.

Reset

This menu is used to reset all settings specified by the user.

1. Press [SETUP] > [General] > [System info].
2. Press [Reset] > [Yes].